5 - 1
5. SPARE PARTS
5.1 Replacement Parts and Consumables
Table 5-1 lists the replacement parts and consumables for this
instrument. It is suggested that a suitable quantity of each item
be stocked in the laboratory to minimize down time. For many
of these items (e.g. lamps), the quantity is dependent on the
level of use of the instrument.
The estimated service life of each part is based on the
assumption that the instrument is operated 160 hours/month
(8 hours/day), 1920 hours/year (240 days).
Table 5-1 Replacement Parts and Consumables
Example use:
Piping between
column outlet and
inlet tube
For standard flow cell
Length : 350 mm,
Inner diameter : 0.25 mm,
Outer diameter : 1.57 mm,
Material : SUS,
PTFE (for
coating)
To Next Page
Loading...