Hitachi PRIMAIDE 1440 - Liquid Crystal Display Contrast Setting

3 - 48
3.5.2 Liquid crystal display contrast setting
Set a contrast (brightness) level of the LCD screen.
1) Turn on the power switch with the
UTLTY
SET UP
key held down.
2) The following display will be presented.
<Setup initial screen>
SETUP: DETECT CONTRAST S. NO.
CH1 4 02AB-111
Press the ENT key.
(3) The following display will be presented.
<Setup items selecting screen>
SETUP ITEMS (DETECTOR=1, CONTRAST=2,
2 EXCHANGE STANDARD=3)
Select CONTRAST.
Press numeric key 2 and then the ENT key.
(4) The following display will be presented.
<LCD contrast setting screen>
LCD CONTRAST (1 - 7)
3
Set a LCD CONTRAST value.
Press a numeric key (1 to 7, usually input 3) and then the
ENT key.
* 1:Dark → 7:Bright
* Default value: 4
(5) LCD contrast setting is now completed and the setup initial
screen appears.
Under CONTRAST, the selected contrast value is indicated.
<Setup initial screen>
SETUP: DETECT CONTRAST S. NO.
CH1 3 02AB-111