Hitachi PRIMAIDE 1440 - Parameter Setting

3 - 4
3.1.2 Parameter setting
(1) For entering a value, press numeric key, then ENT (enter)
key.
(a) Single numeric input
SET PROGRAM NO.(1 – 9)
1
(b) Plural numeric input
LAMP CHANGE (MM, DD, YYYY)
<1 - 12>
(c) Numericl value selection
TIME CONSTSANT (0.05s=1, 0.1s=2, 0.5s=3
4 1.0s=4, 2.0s=5, 4.0s=6, 8.0s=7)
(d) Program setup screen
TIME Ex Em BASE PMT
0.0 250 350 1 3 1
Input procedure
(i) The cursor is indicated on the front line of the
input part. Currently set values are indicated in
the input part.
(ii) Numeric keys and decimal points (.) are accepted
by the upper limit.
Parameter name
Input range
Input part
Parameter name
Input item
Input range
Input part
Parameter name
Selection item
Input part
Input item
Input part