Hitachi PSC-A32MN - 2 MAIN FEATURES; System Overview and Functions

4
P5415644
4.2 ScreenDisplay
“Monitor(AllGroups)”
“Monitor(Block)”
PresentIndication
Todisplaythepresent
indication(allgroups)
UnitConditionIcon
Toindicatetheunitconditionsuch
asltersign,demand,etc.
BlockButton
Tochangethescreendisplay
into“Block”<Monitor(Block)>
indicationbytappingthisbutton.
GroupButton
Toindicatetheoperatingcondition
ofeachgroupasfollows.
 Green: Run
 Gray: Stop
 Red: Abnormal
Ifthetargetgroupbuttonis
tapped,“Settings”ofthetarget
groupscreenwillbeindicated.*
(Refertotheitem7.5.)
“Stopallgr.”Button
Tostopalltheunitssimultaneously
whicharecontrolledbythecentral
station.
“Runallgr.”Button
Torunalltheunitssimultaneously
whicharecontrolledbythecentral
station.
“Settingofall”Button
Tochangethesettingofthe
unitssimultaneouslywhichare
controlledbythecentralstation.
“Menu”Button
Toindicatethemenuitems
suchas“FilterSignReset”,
“ScheduleSetting”,etc.
“AlarmInform.”Button
Toindicatetheabnormality
Tapthebuttonfordetails.
PresentIndication
Todisplaythepresent
indication(groupsinblock)
UnitConditionIcon
Toindicatetheunitconditionsuch
asltersign,demand,etc.
BlockTab
Tochangethemonitordisplayinto
“Block”or“AllGroups”indication.
GroupButton
Toindicatetheoperatingcondition
 Green: Run
 Gray: Stop
 Red: Abnormal
Ifthetargetgroupbuttonis
tapped,“Settings”ofthetarget
groupscreenwillbeindicated.*
(Refertotheitem7.5.)
“StopbyBlock”Button
Tostoptheallgroups
operationinthetarget
blocksimultaneously.
“RunbyBlock”Button
Toruntheallgroups
operationinthetarget
blocksimultaneously.
“SettingbyBlock”Button
Tochangethesettingof
theallgroupsinthetarget
blocksimultaneously.
“Menu”Button,
“IconGuide”Button
“AlarmInform.”Button
SameFunctionasUpper
Figure
“DisplayCondit.”Button
Thesettingconditionoftheair
conditioningunitisdisplayed.
“IconGuide”Button
Tapthisbuttontodisplayan
explanationoftheIcons.
*ThisfunctioncanbeusedwhenControlMode(Run/StopOnly)isin“Disable”mode.
IfControlMode(Run/StopOnly)isin“Enable”mode,theRun/Stopoperationwillbeswitchedbytappingthe
target.
NOTE:Thescreenimagemaybedifferentfromtheactualscreen.
“AirTempDisplay”Button
Theoutsideairtemperatureandthe
inlettemperaturearedisplayed.