Hitachi PSC-A32MN - Run;Stop For Each Group; Run;Stop Operation For Each Group (Control Mode (Run;Stop Only): Disable); Run;Stop for each Group

12
P5415644
7.5 Run/StopforEachGroup
ThemodeisdifferentdependingonthesettingoftheControlMode(Run/StopOnly).
ControlRestricted(Run/StopOnly):ControlMethodwhensetas“Disable” Refertotheitem7.5.1.
ControlRestricted(Run/StopOnly):ControlMethodwhensetas“Enable” Refertotheitem7.5.2.
7.5.1 Run/StopforEachGroup(ControlRestricted(Run/StopOnly):“Disable”)
(1) Selectthescreenof“Monitor(All
Groups)”or“Monitor(Block)”.
Selectthegrouptosetbytapping
thegroupbutton.
(2) Selectedgroupsettingwillbe
indicatedonthetouchscreen
display.Tap“ON”or“OFF”.
(3) Tap“Monitorscreen”toreturnto
Monitorscreen.
<Monitor(AllGroups)> <Monitor(Block)>
(1)
(1)
(2)
(3)