Hitachi PSC-A32MN - Swing Louvre Direction

16
P5415644
7.8 SwingLouvreDirection
(1) Selectthetargetgroupatscreenof
“Monitor(AllGroups)”or“Monitor
(Block)”tochangetheswinglouvre
direction.
Thepop-upof“Setting”forthe
selectedgroupisdisplayedonthe
touchscreen.
(2) Bytapping“
“or“ ”ofthe
“LOUVRE”,theswinglouvre
directionwillbechangedalternately
asfollows.
AUTO
:Autoswingoperationwillbe
started.
(3) Tap“Monitorscreen”toreturnto
Monitorscreen.
NOTES:
• Bytapping“<”or“>”atthedetailedsettingscreen,theSwingLouvreDirectionwillbeswitchedtoanothergroup
inthesameblock.
• ControlRestricted(Run/StopOnly):Incaseof“Enable”,eachSettingChangeisforallGroupsorBlocks.
SettingChangeisnotpossibleforeachGroup.
• DependingonthemodeloftheAirConditioner,thesettingmaynotbepossibleormaybecalibrated
automatically.
• LouvrepositiononLCDandtheactuallouvrepositiondonotalwaysmatchduringtheautoswingoperation.
• TheactualSwingLouvreDirectionmaynotstopimmediatelyaftertheswitchispressed.
• Ifthesettingsaremixedwhenmultiplegroupsareselected,thedisplaywillremainblank.
AUTO
LCD
Indication
COOL
DRY
HEAT
FAN
Angle Range
Angle Range
Auto
Swing
Auto
Swing
<Monitor(AllGroups)> <Monitor(Block)>
(1)(1)
(2)(3)