Hitachi PSC-A32MN - Display Of Specified Block; Display of Specified Block

P5415644
9
7.2 DisplayofSpeciedBlock
(1) Selectthetargetblockfromthe
screenof“Monitor(AllGroups)”or
“Monitor(Block)”.
(2) Thegroupsintheselected
blockwillbedisplayedonthe
touchscreen.
Eachoperationstatusisindicated
bycolorofthegroupbuttonas
follows:
Green: Run
Gray: Stop
Red: Abnormal
*“Block”screenmaybedifferent
dependingontheControlPattern.
Thescreenontheleftindicates
thePatternA
(4Blocks×8Groups)setbythe
ControlPattern.
(3) Tap“AirTempDisplay”todisplay
theoutsideairtemperatureandthe
inlettemperature.
(4) Tap“DisplayCondit.”todisplaythe
conditionoftheoperation.
NOTE:
•Thetouchscreendisplaywillautomaticallysleepwhenthetouchscreenisnotoperatedforthegivenlengthof
time.(Towakeup,tapthescreen.)
• Itmaytaketimetodisplaythetemperature.
• Theinlettemperatureisdisplayedonlywhileoperating.
<Monitor(AllGroups)> <Monitor(Block)>
(1) (1)
(2)
(3)(4)