Hitachi PSC-A32MN - Switch Setting Procedure

P5415644
11
7.4 SimultaneousRun/StopforEachBlock
(1) Selectthetargetblockfrom
thetouchscreendisplaytoset
simultaneousRun/Stopoperation.
(2) Tap“RunbyBlock”whenthe
selectedBlockrunssimultaneously.
Tap“StopbyBlock”when
theselectedBlockstops
simultaneously.
(3) Theconrmationscreenwillbe
indicated.
Tap“Yes”.
Allgroups(allindoorunits)in
theselectedblockconnected
tothecentralstationwillbe
simultaneouslyoperated.
Tap“No”tocancelthiscommand.
NOTES:
•“Run/StopbyBlock”commandwillnotbeeffectedtotheblocksspeciedin“ExceptionSettingofRun/Stop
Operation”.
•IncasethattheIceStorageSeriesisconnected,theAirConditionerUnitcannotoperatewhiletheHeatStorage
Unitisoperating.
(1)
(2)
(3)