Hitachi PSC-A32MN - Reset The Filter Operation Time

P5415644
 23
(1) Select“FilterSignReset”fromthe
screenof“Menu”.
(Thisisavailableonlywhenthe
ltersignisindicated.)
(2) SelectthetargettoresettheFilter
operatingtime.
•Tap“DisplayAllGroups”totarget
allgroups.
•ThetargetGroupsareindicatedin
Yellow.
•Whenselected,thegroupbutton
willbeindicatedwitha“
”sign.
(3) Tap“Executereset”.
(4) Tap“Yes”ontheconrmation
screen.
•ThegroupthatindicatedFilter
SignwillresetFilterSignand
Filteroperatingtime.
•Thegroupthatdidnotindicate
FilterSignwillresetFilter
operatingtime.
•Tap“No”toreturntoFilterSign
Resetscreen.
(5) Tap“Menu”toreturntoMenu
screen.
NOTES:
•ThisscreenmaybedifferentdependingontheControlpattern.ThescreenabovedisplaysthepatternA
(4blocks×8groups)setbytheControlpattern.
• FilterSignwillbeindicatediftheoperatingtimeoftheFilterreachesthetimeset.
8.3.2ResetFilterOperatingTime
(1)
(3)
(2)
(4)
(5)