Hitachi PSC-A32MN - 5.1.6 Setting of Control Patterns

18
P5415644
7.10 Permitting/ProhibitingOperationfromRemoteControlSwitch
Thisfunctionisusedforprohibitingtheoperationfromtheremotecontrolswitch.
Whentheremotecontrolswitchissetasprohibited(byItem/AllItems),thecontroloftheselecteditemwill
notbeavailable.Theitemsthatcanbeselectedare:Run/Stop,OperationMode,FanSpeed,SwingLouvre
andTemperature.
(1) Selectthetargetgroupatthe
screenof“Monitor(AllGroups)”or
“Monitor(Block)”tosetthefunction
of“RCSOperationProhibited”
setting.
Thepop-upof“Setting”forthe
selectedgroupisdisplayedonthe
touchscreen.
(2) Select“Remotecontroloperation”
bytapping.
.
(3)Tap“Monitorscreen”toreturnto
Monitorscreen.
NOTE:
PayattentiontothefollowingwhenthegroupsupportprohibitionbyItem.
• Whensetting“Remotecontroloperation,”donotusethefunctioncontrollockoftheremotecontrolswitch.
*Whenusingatthesametime,“Remotecontroloperation”andcontrollockfunctions,“Remotecontrol
operation”ispriorandthecontrollockfunctioncannotbeset.
*Whenchangingsettingfrom“Allprohib.”to“Allpermitt.”at“Remotecontroloperation”,allthesetting
forthecontrollockoftheremotecontrolswitchwillbecancelled.
<Monitor(AllGroups)> <Monitor(Block)>
(1)(1)
(2)
(3)