EasyManua.ls Logo

Hitachi PSC-A32MN - 5.1.7 Group Register Operations

Hitachi PSC-A32MN
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P5415644
19
NOTES:
• Bytapping“<”or“>”atthedetailedsettingscreen,theremotecontrolswitchPermitted/Prohibitedwillbe
switchedtoanothergroupinthesameblock.
ControlProhibited(Run/StopOnly):Incaseof“Enable”,eachSettingChangeisforallGroupsorBlocks.
SettingChangeisnotpossibleforeachGroup.
• Evenifremotecontrolswitchissetas“Prohibit.”,itispossibletostopoperationwiththeremotecontrol
switchwhilerunning.Itisalsopossibletorestartoperationusingtheremotecontrolswitch.However,the
Stopoperationwillbeonlyusedinthecaseofanemergency.Donotuseitinnormaloperation.
• If“PowerSupplyON/OFF”(d1,d3)isset,donotsettheremotecontrolswitchas“Prohibit.”.Iftheremote
controlswitchisrestrictedwhenusing“PowerSupplyON/OFF”,thefunction“Controllock”fortheremote
controlswitchshallbeused.
• Ifacommunicationerroroccurs,theremotecontrolswitch“STOP”(byitem)maybecancelled.Inthis
case,dothesettingagain.
• DonotsettheprohibitingoperationifmultiplecentralizedcontrollersareusedinthesameH-LINK.
Additionally,donotsetthisbyothercentralizedcontrolleroritmaycausemalfunction.

Table of Contents

Other manuals for Hitachi PSC-A32MN

Related product manuals