Hitachi PSC-A32MN - Filter Sign Reset; Reset The Filter Sign

22
P5415644
(1) Select“FilterSignReset”fromthe
screenof“Menu”.
(Thisisavailableonlywhenthe
ltersignisindicated.)
(2) SelectthetargettoresettheFilter
Sign.
•Tap“DisplaywithSign”toindicate
onlythegroupwithFilterSign.
•ThetargetGroupsareindicatedin
Yellow.
•Whenselected,thegroupbutton
willbeindicatedwitha“
”sign.
(3) Tap“Executereset”.
(4) Tap“Yes”ontheconrmation
screen.
•FilterSignandoperatingtimewill
bereset.
•Tap“No”toreturntoFilterSign
Resetscreen.
(5) AfterresetFilterSign,thebutton
willchangetoInactive.
(6) Tap“Menu”toreturntoMenu
screen.
NOTES:
•ThisscreenmaybedifferentdependingontheControlpattern.ThescreenabovedisplaysthepatternA
(4blocks×8groups)setbytheControlpattern.
• FilterSignwillbeindicatediftheoperatingtimeoftheFilterreachesthetimeset.
8.3 FilterSignReset
8.3.1ResetFilterSign
(1)
(6)
(3)
(2)
(4)