Hitachi PSC-A32MN - Page 31

P5415644
25
(6) Set the schedule time, run/stop
operation and temperature.
* Select the schedule item No.
(1~10) and set the time.
* Select “ON”, “OFF” or “Unspe.”.
* Set the temperature by tapping
“
” or “ ”.
* “- -” will be indicated when the
time and temperature are not set.
(7) Tap“Settingcompleted”toconrm
the setting. If tap “Cancel”, the
setting currently displayed will be
cancelled and the screen will return
to the schedule setting screen.
* To set the same day of the week,
refer to the (5).
* To set other days of the week,
refer to the (4).
(8) Tap “Return to Group sel.” to set
the schedule timer for other groups.
The screen will return to Schedule
Control selection screen.
* After the schedule is set, the
registered schedule No.
(
1
~
32
) will be indicated in the
group button.
(The scheduled group button
color changes to blue.)
* In case that the setting is the
same, the same registered
schedule No. will be indicated.
(9) Tap “Submenu” to return to
schedule setting screen.
NOTES:
• Make sure that the time and RUN/STOP are set for the timer setting. (It is not necessary to set the temperature.)
• The schedule control selection screen may be different depending on the control pattern.
(6)
(8)
(7)
(9)
0:00 1:00 2:00
1:30
1:00 2:00 3:00
1:30
The schedule cannot be performed.
The schedule will
be performed.
The schedule will be performed.
1:00 2:00 3:00 4:00
2:30
▪ScheduleprocesswhenSummerTimeisoperating.
<Starting Time>
When starting at 2:00 with a 1 hour
shifting time, the schedule set at
2:30 cannot be performed.
<Finishing Time>
Whennishingat2:00witha1hour
shifting time, the schedule set at
0:30 will be performed twice.