Hitachi RAS-3-HVNC - Test Run Procedure Using the Remote Control Switch (PC-ARF)

7. Test run
172
SMGB0079 rev.0 - 01/2013
7.3 Test run procedure using the remote control switch (PC-ARF)
Display Part
A/C
COOL
HIGH
LOUV. ADJ
Meeting Room
MODE SPEED LOUV. TEMP
FLTR
OK
?
Filter Sign Indicator
FLTR
It is indicated at the set period for lter
cleaning.
Operation Lock Indicator
It is indicated when the operation lock
function is set.
Schedule Timer Indicator
It is indicated when the schedule timer
function is set.
Swing Louver
Indicator
Fan Speed Indicator
Arrow Key Enter Key
RUN/STOP Switch
Run Indicator
It lights while the unit is
operated, and it ashes in
an abnormal conditions.
Operation Mode
Indicator
The indications of “HEAT”
and “AUTO” are indicated
only for the heat pump type
models.
Operation Guide
Indicator
“Central Control” is
indicated while the remote
control operation is
prohibited.
Room Name
Indicator
Operation Part
Setting Temperature
Indicator
Help Switch
To display Help Menu.
Return Switch
To return to the previous
screen.
Menu Switch
To display Menu.
1
Turn ON the power supply for all the indoor units.
2
For the models with the auto-address function, wait for 3 minutes approximately. The addressing is automatically
performed. (There is a case that 5 minutes is required according to the setting condition.) After that, select using
language from “Menu”. Refer to the operation manual for details.
3
Press and hold “
” (menu) and “ ” (return) simultaneously for at least 3 seconds.
Test run screen
a.
The test run menu will be displayed.
ADJ
/
OK
Test Run Menu
Test Run
Function Selection
Thermistor Selection
Input/Output
Function 5
01
03
ENT. RTN.SEL.