Hitachi RCIM-1.0FSRE - Page 128

5 Optional functions
Optional functions through Remote control
SMGB0137 rev.0 - 05/2021
118
Element Optional function
Individual
setting
Settings Setting conditions Description
J5
Not used -
00
- Use at 00 conditions
01
J6
Not used -
00
- Use at 00 conditions
01
J7
Enabling steps 6 and 7 for
the air louvre in COOLING
or DRY mode
O
00
Function disabled
(factory setting)
When a RPK unit is stopped
in louvre positions 6 or 7, the
louvre is set to position 5.
01
Function enabled
J8
Eco-operation X
00
Function disabled
(factory setting)
When the unit is restarted by
the remote control switch, the
temperature automatically
changes to the setting
temperature of “F5” or “F6”.
Models:
RPF(I)-FSN2E
Not available, use at 00
conditions
01
Function enabled
J9
Not used -
00
- Use at 00 conditions
01
JA
Display of "Simple
maintenance display"
menu
O
00
Function disabled
(factory setting)
Enables the “Simple
maintenance display” menu.
Models:
RPF(I)-FSN2E
Not available, use at 00
conditions
01
Function enabled
Jb
Enable automatic fan
speed setting
O
00
Function disabled
(factory setting)
Models:
RPF(I)-FSN2E
Not available, use at 00
conditions
01
Function enabled
K1
Not used -
00
- Use at 00 conditions
01
K2
Not used -
00
- Use at 00 conditions
01
K3
Not used -
00
- Use at 00 conditions
01
K4
Not used -
00
- Use at 00 conditions
01
02
03
K5
Detection level of the
motion sensor kit
O
00
Standard (factory setting)
Models:
RPF(I)-FSN2E
Not available, use at 00
conditions.
This parameter denes the
sensitiveness of the motion
sensor. The amount of activity in
the room is assessed according
to a di󰀨erent scale based on this
setting.
Detailed information about the
operation of the motion sensor
can be found in the technical
documentation of the indoor
units.
01
High
02
Low