Hitachi RCIM-1.0FSRE - Indoor Unit Mounting Details; Optional Air Outlet Grille Installation

2 Optional accessories
Air Inlet Direction Change
SMGB0137 rev.0 - 05/2021
34
2.8 Air Inlet Direction Change
2.8.1 For RPI(L/H)-(0.4-6.0)FSRE units
Itispossibletochangethefactory-defaultairinletpositionfrombacksidetothebottomsideintheentireRPI(L)-FSRE
range.
Thischangeofairinletfromthebacksidetothebottomsidecanbeachievedbyaddinganoptionalaccessory(*)
specicallydesignedforthispurpose.
?




Inlet air
direction
Inlet cover
Bottom cover
InletChangeAccessoryKit
Inlet Change
AccessoryKit
NOTE
Inlet change accessory codes:
- D-ICA15R (7E590912) - RPIL-(0.4-1.5)FSRE
- D-ICA20R (7E590913) - RPI-(1.5-2.0)FSRE
- D-ICA30R (7E590914) - RPI-(2.5-3.0)FSRE
- D-ICA60R (7E590915) - RPI-(4.0-6.0)FSRE