5 Optional functions
Optional functions through Remote control
SMGB0137 rev.0 - 05/2021
168
P2 – Not used
P3 – Temperature sensor displayed
This function is used to select the thermistor whose temperature is shown.
P4 – Display of sensor temperature
This function is used to display the temperature of the sensor selected with P3.
P5 – Display of setting temperature when operation mode is Fan
This function is used to hide the display of setting temperature during operation in fan mode.
P6 – Operation of the ECO button
The Operation of ECO button is disabled when P6 is set to 01.
P7 – Prohibition of menu screen transition
This function is used to prohibit the access to the menu screens. The text “Display disabled” appears on screen instead.
PA – Daylight saving time
This function is used to set the amount of adjustment when daylight saving time is applied.
Pb – Not used
PC – Not used
91 – Not used
92 – Not used
93 – Not used
94 – Not used
95 – Not used
96 – Not used
97 – Not used
98 – Not used
9g – Not used
9A – Not used
9b – Not used
9C – Not used
9d – Not used
9e – Not used
9F – Not used
r1 – Dual set point
Function in the automatic cooling/heating mode allowing the preset of respective setpoint for cooling and heating.
To Next Page
Loading...
