Hitachi SJ200 Series

Parameter Settings for Keypad Entry
Appendix C
C–10
C075 Communication stop bit selection 1 1
C076 Communication error select 02 02
C077 Communication erorr time-out 0.00 0.00
C078 Communication wait time 0. 0.
C081 O input span calibration 100.0 100.0
C082 OI input span calibration 100.0 100.0
C085 Thermistor input tuning 100.0 100.0
C086 [AM] terminal offset tuning 0.0 0.0
C091 Debug mode enable 00 00
C101 Up/Down memory mode
selection
00 00
C102 Reset selection 00 00
C141 Input A select for logic output 00 00
C142 Input B select for logic output 01 01
C143 Logic function select 00 00
C144 Terminal [11] ON delay 0.0 0.0
C145 Terminal [11] OFF delay 0.0 0.0
C146 Terminal [12] ON delay 0.0 0.0
C147 Terminal [12] OFF delay 0.0 0.0
C148 Output relay ON delay 0.0 0.0
C149 Output relay OFF delay 0.0 0.0
“C” Group Parameters Default Setting
User
Setting
Func.
Code
Name
-FEF
(EU)
-FU
(USA)