Hitachi SJ200 Series Connection Manual

1
Hitachi IES Co., Ltd.
Inverter MODBUS
RTU Driver
1 System Configuration.......................................................................................................3
2 External Device Selection................................................................................................6
3 Communication Settings ..................................................................................................7
4 Setup Items....................................................................................................................19
5 Cable Diagrams .............................................................................................................23
6 Supported Devices.........................................................................................................41
7 Device Code and Address Code....................................................................................45
8 Error Messages..............................................................................................................47

Hitachi SJ200 Series Specifications

General

Series	SJ200
Category	Inverter
Output Frequency	0.1 to 400 Hz
Overload Capacity	150% for 60 seconds
Cooling Method	Fan cooled
Humidity	5 to 95% RH (non-condensing)
Control Method	V/f Control, Sensorless Vector Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat
Ambient Temperature	-10 to 50°C
Braking Unit	Built-in
Communication	RS-485 (Modbus RTU)
Altitude	Up to 1000m
Output Voltage	3-Phase 200-240 VAC, 3-Phase 380-480 VAC
Storage Temperature	-20 to +60°C (-4 to 140°F)