Inverter MODBUS RTU Driver
GP-Pro EX Device/PLC Connection Manual
44
6.6 WJ200 series
This address can be specified as system data area.
Device Bit Address Word Address 32bits Notes
Coil 00001 - 00058 00001 - 00041
*1
*1 For word addresses, only specify addresses with "1" as the last digit.
Holding register - 40001 - 4252D
• Holding register 0900h is an address for writing to nonvolatile memory. By storing "1" in
0900h, writing to nonvolatile memory is enabled.
• You can only set the Read Area Size for the system area in the External Device. Please refer to
the GP Pro-EX Reference Manual for Read Area Size.
Cf. GP Pro-EX Reference Manual "LS Area (Direct Access Method Area)"
• Refer to the precautions on manual notation for icons in the table.
)"Manual Symbols and Terminology"
To Next Page
Loading...
