Inverter MODBUS RTU Driver
GP-Pro EX Device/PLC Connection Manual
6
2 External Device Selection
Select the External Device to be connected to the Display.
Setup Items Setup Description
Number of Devices/PLCs
Use an integer from 1 to 4 to enter the number of Devices/PLCs to connect to the
Display.
Manufacturer
Select the manufacturer of the External Device to be connected. Select "Hitachi IES
Co., Ltd.".
Series
Select a model (series) of the External Device to be connected and connection method.
Select "Inverter MODBUS RTU".
In System configuration, check to make sure the external device to which you are
connecting is supported in "Inverter MODBUS RTU".
)"1 System Configuration" (page 3)
Port Select the Display port to be connected to the External Device.
Use System Area Not available in this driver.
To Next Page
Loading...
