Chapter 4 How To Use EzSQ
4 - 2
4.1.2 Terminating EzSQ
(1) In the "Editor" window, select "Exit" from the "File" menu, or click in the top-right corner of the
window.
(2) If you attempt to exit EzSQ before saving the currently edited program, the following message dialog
box will appear:
[Yes]: Saves the currently edited program, and then terminates EzSQ.
[No]: Terminates EzSQ without saving the currently edited program.
[Cancel]: Cancels the termination of EzSQ.
(3) If you have already saved the currently edited program, the following message dialog box will appear:
[Yes]: Terminates EzSQ.
[No]: Cancels the termination of EzSQ.
(1)
(1)
To Next Page
Loading...
