Chapter 4 How To Use EzSQ
4 - 5
(3) Opening an existing program file
1) Select "Open program" from the "File" menu.
(Shortcut command: Ctrl + O keys or the file-opening icon button under the menu bar)
2) The "Open" dialog box appears.
3) Select the file to be opened, and then click the [Open] button. The Program Editor reads the
selected program file. You can select "*.isq" or "*.csv" as the file type.
(4) Overwriting a file
1) Select "Save program" from the "File" menu.
(Shortcut command: Ctrl + S keys or the file-saving icon button under the menu bar)
2) The currently edited program is saved by overwriting the file having the same file name as the
program name of the currently edited program.
To Next Page
Loading...
