Hitachi UX Twin Nozzle - Input Registers Configuration

26
Holding Register data configuration (12/13)
Word
address
Classification Item name Setting range Contents
26 30
Edit
substitution
rule
Substitution rule No. 1 to 99
Sets the number and the name of
Substitution rule 1.
(Read only. Write operation is the
future subject.)
26 31
Substitution rule name
(1st digit)
0x0020 to 0xFFFF
26 32
Substitution rule name
(2nd digit)
0x0020 to 0xFFFF
… … …
26 3B
Substitution rule name
(11th digit)
0x0020 to 0xFFFF
26 3C
Substitution rule name
(12th digit)
0x0020 to 0xFFFF
26 3D Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
26 3F Reserve_3
26 40
Substitution rule(Rule 2)
-
Substitution rules 02 through 99
will be set in the same
configuration as those of
Substitution rules 01 (Address:
from 0x2630 to 0x263F).
(Read only. Write operation is the
future subject.)
26 4F
… …
2C 50
Substitution rule(Rule 99)
2C 5F
2C 60
Reserve
Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
2C 6F Reserve_16
2C 70
Printing Job
Management
(Future
subject)
Printing job function 0 , 1
Sets the printing job function.
0:Disable , 1:Enable
2C 71 Control status 0 , 1
Sets the control status.
0:stop , 1:start
2C 72
Print count 0 to 99999 Sets the print count.
2C 73
2C 74 Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
2C 7F Reserve_12
2C 80
Reserve
Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
2C FF Reserve_128
2D 00
User pattern
(Fixed size)
User pattern registration 01 0x0000 to 0xFFFF
Status of User pattern registration
(Registered or NOT) is set by bit
information ON or OFF. User
pattern registration 01 shows 16
status of User pattern registration
000 through 015 starting from the
upper bit. Subsequently, the same
data structure as that of User
pattern registration 01 will follow.
2D 01 User pattern registration 02 0x0000 to 0xFFFF
… … …
2D 0B User pattern registration 12 0x0000 to 0xFFFF
2D 0C User pattern registration 13 0x0000 to 0xFFFF
2D 0D Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
2D 1F Reserve_19
2D 20 Pattern data 0x0000 to 0xFFFF
User pattern data will be set, size
by size and moved up to front.
Please note that the address of
User pattern data will be different
size by size. Please refer to 4.5.(2)
Details of User pattern data
(Fixed-size and Free-size), for
details.
2D 21 Pattern data 0x0000 to 0xFFFF
… … …
64 FE Pattern data 0x0000 to 0xFFFF
64 FF Pattern data 0x0000 to 0xFFFF