4
2.4 Setting the communication environment
● Set the LAN function on communication environment setup screen to "Modbus
communication".
Setting item of communication environment setup screen
Setting item Description
LAN function
● No use: Modbus communication function cannot be used.
● Modbus Communication: Modbus communication function
can be used.
IP address Sets IJ Printer’s IP address.
Subnet mask Sets IJ Printer’s Subnet mask.
Default gateway Sets IJ Printer’s Default gateway.
PORT No. Sets IJ Printer’s PORT No.
MAC address Displays IJ Printer’s MAC address.
Example communication environment setup screen
2.5 Usage precautions
(1) Functions listed below are not operational during the use of this function.
List of functions which are not operational during the use of this function
(2) Functions listed below are not supported by this function.
List of functions which are not supported by this function
No Screen Item Note
1
Comm. env. setup
Buffer function [Disable] Fixed
2 Data exchange [Reflect at once] Fixed
No Function
1 More than one of Calendar/Count blocks can not be set in one item.
2 Barcode can not be set in Calendar/Count block.
3 “Overall setup” of “Format setup” can Not be used.
4 Kanji characters can not be used.
To Next Page
Loading...
Need help?
General
