Hitachi UX Twin Nozzle - Page 38

36
Input Register data configuration (9/9)
Word
address
Classification Item name Setting range Contents
0E F0
Various data
Current message data length 0 to 1000
Gets the message data length
(Character count x 2) of the current
message.
0E F1
Inter-character space
(Character units)
0 to 28
When Character position is
specified at Holding Register
address 0x0011, its Inter-character
space will be obtained.
0E F2 Calendar block count 0 to 8
Gets the calendar block count of
the current message.
0E F3
Calendar characters count
(Calendar block 1)
0 to 20
Gets the calendar characters
count for 8 blocks of the current
message.
0E F4
Calendar characters count
(Calendar block 2)
0 to 20
… … …
0E F9
Calendar characters count
(Calendar block 7)
0 to 20
0E FA
Calendar characters count
(Calendar block 8)
0 to 20
0E FB Time count block No. 0 to 8
Gets the time count block No. of
the current message.
0E FC Shift code block No. 0 to 8
Gets the shift code block No. of the
current message.
0E FD Shift code rule count 0 to 48
Gets the shift code rule count of
the current message.
0E FE Count block count 0 to 8
Gets the count block count of the
current message.
0E FF
Count characters count
(Count block 1)
0 to 20
Gets the count characters count
for 8 blocks of the current
message.
0F 00
Count characters count
(Count block 2)
0 to 20
… … …
0F 05
Count characters count
(Count block 7)
0 to 20
0F 06
Count characters count
(Count block 8)
0 to 20
0F 07 Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
0F 0F Reserve_9
0F 10
Inter-character space
(1st digit)
0 to 28
Gets the inter-character space for
500 characters of the current
message.
0F 11
Inter-character space
(2nd digit)
0 to 28
… … …
11 02
Inter-character space
(499th digit)
0 to 28
11 03
Inter-character space
(500th digit)
0 to 28
11 04 Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
12 FF Reserve_508
13 00
Printing Job
Management
(Future
subject)
Print completion count 0 to 99999 Gets the print completion count.
13 01
13 02 Print completion status 0 to 2
Gets the print completion status.
0:Non-completion
1:Print completion
2:Fault
13 03 Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
13 0F Reserve_13