CAMERA/RECORDER TO VCR DUBBING
65
CAMERA/RECORDER TO VCR DUBBING
If you wish to exchange or copy some of your friend's favorite home recordings, the
following instructions can be used to connect camera/recorder to VCR for this purpose.
1. Connect the video/audio cord (provided) to "AUDIO" and "VIDEO" of your
camera/recorder.
2. Connect the other ends to "AUDIO IN", "VIDEO IN" of your VCR as shown in the
diagram above.
3. Set "AV OUT/IN" switch to "OUT" position.
4. Play the tape on the camera/recorder and record it on the VCR.
NOTE: If you connect the "VHF OUT TO TV" connector of VCR to the "TV ANT"
connector, as illustrated and set "VCR/TV" selector of the VCR to "VCR" mode, the picture
being dubbed by VCR can be monitored.
To Next Page
Loading...
