TROUBLESHOOTING
73
RECORDING TV PROGRAMS OFF THE AIR
Symptom Check Point & Correction
The camera/recorder can not go into the recording The cassette has had the erase
mode, even when "REC/PAUSE" button is pressed. prevention tab removed.
Stick a piece of cellophane
tape over the erase prevention
hole or select a different
cassette.
Set "POWER" switch to
"CAM" position.
Connect the camera/recorder
and TV (or VCR).
Set "AV OUT/IN" switch to
"IN" position.
BATTERY CONDITION
Symptom Check Point & Correction
The " " indication in the electronic viewfinder Try another battery or charge flashes to
indicate battery is discharged. the battery.
NO OPERATION IS ACCEPTED
Symptom Check Point & Correction
Power is turned on, but no button operations are Remove the power source,
accepted. and after about one minute,
push the reset switch gently
using a toothpick, etc. until
you feel a click. Since this
erases the date, time and
other customer preferred
features, reset them again.
To Next Page
Loading...
