Number Item Description
3 Locate LED Amber:
■
Indicates the location of
the chassis.
■
Can be turned on or
turned off by the
maintenance utility.
4 ALARM LED Red: ENC can be replaced.
5 PATH (IN) LED Blue: IN side port is linked
up.
6 PATH (IN) connector Connects to a controller or
drive tray.
7 PATH (OUT) LED Blue: OUT side port is linked
up.
8 PATH (OUT) connector Connects to a drive tray.
9 Console This port is reserved.
10 Power supply unit N/A
11 Receptacle Connects to the power cable
provided with the storage
system.
12 AC IN LED Green: Normal operation.
13 ALM LED Red: Power supply unit can
be replaced.
14 RDY LED Green: Normal operation.
SFF and LFF AC power supply unit LEDs and connectors
Both SFF and LFF drive trays are equipped with AC power supply units. The AC power
supply units include LEDs to display its operating status.
Note:
The DBS and DBL power supply has a Silver efficiency rating.
The DBSE and DBLE power supply has a Platinum efficiency rating.
SFF and LFF AC power supply unit LEDs and connectors
Chapter 3: Drive trays
VSP N400, N600 Hardware Reference Guide 41
To Next Page
Loading...
