Hitachi VSP N400 - Iscsi Specifications

iSCSI specifications
Item Specification Comments
iSCSI target function Supported N/A
iSCSI target function Supported TrueCopy
®
only
iSCSI ports 2 per interface board Maximum 32 per iSCSI
system
Connection methods Direct and switch
connections
Host connections 255 (maximum per iSCSI
port)
With Linux software initiator,
the maximum number
decreases.
Path failover HDLM
1
Supports Microsoft MPIO
(Multi Path I/O)
Link 10 Gbps SFP+ N/A
Transfer speed 10 Gbps N/A
Connector type LC N/A
Cable Optical OM3, OM2 MMF
cable
N/A
Network switch L2 or L3 switch Should comply with
IEEE802.3ae
Switch cascading Maximum: 5 switches or
fewer
Minimum number of
cascading switches is
recommended.
MAC address Per port (fixed value) Factory setting: World Wide
Unique value. Cannot be
changed.
Maximum transfer unit
(MTU)
1,500, 4,500, 9,000 bytes
(Ethernet frame)
Jumbo frame, MTU size
greater than 1500
Link aggregation Not supported N/A
Tagged VLAN Supported N/A
IPv4 Supported N/A
iSCSI specifications
Appendix F: Data and power cables
VSP N400, N600 Hardware Reference Guide 92