Power cable assemblies
For information about racks and power distribution units (PDUs), refer to the Hitachi Universal
V2 Rack Reference Guide.
Hitachi power cables consist of three parts:
■
Plug: Male connector for insertion into the AC outlet providing power. The physical design
and layout of the plug's contact meet a specific standard.
■
Cord: Main section of insulated wires of varying length, whose thickness is determined by
its current rating.
■
Receptacle: Female connector to which the equipment attaches. The physical design and
layout of the receptacle's contacts meet a specific standard. Common standards are the
IEC C13 receptacle for loads up to 10 amperes (A) and the IEC C19 receptacle for loads
up to 15 A.
Number
Country or
region
Voltage rating
(VAC)
Current rating
(amperes) Plug type
1
1
North America 100-127 15 NEMA 5-15P
Brazil 200-240 10, 20 NEMA 5-15P
Japan 100-127 12 JIS C8303
Taiwan 100-127 12, 16 CNS 690
2 North America 100-127 20 NEMA 5-20P
3 North America 200-240 20 NEMA L6-20P
3 North America 200-240 30 NEMA L6-30P
4
2
North America 200-240 30 NEMA L15-30P
5
3
Hong Kong 200-240 13 BS-1363
Singapore 200-240 13 BS-1363
6 Chile 200-240 10, 16 CEI 23-50
Italy 200-240 10, 16 CEI 23-50
7 Argentina 200-240 10, 15 IRAM 2073
Power cable assemblies
Appendix F: Data and power cables
VSP N400, N600 Hardware Reference Guide 98
To Next Page
Loading...
