Appendix B: Electrical specifications for VSP
N400, N600
The electrical specifications are described for the storage systems.
Electrical specifications
Item Controller Drive tray
Input voltage (operable
voltage range) (V)
AC 200-240 +6%/-11% SFF, LFF, FMD, and dense
intermix drive tray: AC
200-240 +6%/-11%
Frequency (Hz) 50/60 ±1
Number of phases, cabling Single-phase with protective grounding
Steady-state current 100V/
200V
1
,
2
CBLM: 4.0x2 SFF drive tray: 2.4x2/1.2x2
LFF drive tray: 1.9x2/1.0x2
FMD drive tray: 2.6x2/1.3x2
Dense intermix drive tray: -/
3.0x2
Current rating of breaker/
fuse (A)
16.0 (each electrical)
Heat value (normal) (kJ/h) CBLM: 2160 or less SFF drive tray: 1120 or less
LFF drive tray: 940 or less
FMD drive tray: 1520 or less
Dense intermix drive tray:
3460 or less
Steady-state power (VA/W)
3
CBLM: 1600/1560 or less SFF drive tray: 480/460 or
less
LFF drive tray: 380/350 or
less
FMD drive tray: 520/490 or
less
Appendix B: Electrical specifications for VSP N400, N600
VSP N400, N600 Hardware Reference Guide 70
To Next Page
Loading...
