EasyManua.ls Logo

HITEC X1 Pro - Page 5

HITEC X1 Pro
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
WARNINGS AND SAFETY NOTES
A The allowable DC input voltage is 11-18V DC.
A Keep the charger away from dust, damp, rain, heat, direct
sunlight and excessive vibration.
A If the charger is dropped or suers any type of impact, it
should be inspected by an authorized service station before
using it again.
A This charger and the battery should be put on a heat-resis-
tant, non-ammable and non-conductive surface.
A Never place a charger on a car seat, carpet or similar surface.
Keep all ammable, volatile materials away from the operat-
ing area.
A Verify the specications of the battery to be charged or dis-
charged to ensure it meets the requirements of this charger.
If the program is set up incorrectly, the battery and charger
can be damaged.
A Fire or explosion can occur due to overcharging.
A To avoid a short circuit between the charge lead, always con-
nect the charge cable to the charger before connecting the
battery. Reverse the sequence when disconnecting.
A Never attempt to charge or discharge the following types of
batteries:
• A battery tted with an integral charge circuit or a
protection circuit

Other manuals for HITEC X1 Pro

Related product manuals