Hitron CVE-30360 User Manual

32
HITRON CVE-30360 USER’S GUIDE
CABLE
2.3 THE INITIALIZATION SCREEN
This screen displays the steps successfully taken to connect to the Internet over the
CATV connection.
Use this screen for troubleshooting purposes to ensure that the CVE-30360 has
successfully connected to the Internet; if an error has occurred you can identify the
stage at which the failure occurred.
NOTE: This screen displays when you first log in to the CVE-30360.
Click Cable > Initialization. The following screen displays.
Primary BSSID
MAC Address
This displays the Media Access Control (MAC) address of
the CVE-30360’s Basic Service Set IDentifier (BSSID).
This is the MAC address of the wireless module to which
wireless clients connect.
NOTE: You may have additional BSSIDs, depending on
your contract with your service provider.
System Time This displays the current date and time.
System Uptime This displays the number of days, hours, minutes and
seconds since the CVE-30360 was last switched on or
rebooted.
Network Access This field displays when you are connected to your service
provider, and shows whether or not your service provider
allows you to access the Internet over the CATV
connection.
 Permitted displays if you can access the Internet.
 Denied displays if you cannot access the Internet.
TABLE 7: The Cable > System Info Screen (continued)

Hitron CVE-30360 Specifications

General

Brand	Hitron
Model	CVE-30360
Category	Network Router
Language	English