HITRON CVE-30360 USER’S GUIDE
WIRELESS
6.4.2 THE SECURITY SCREEN
Use this screen to configure authentication and encryption on your wireless network.
NOTE: It is strongly recommended that you set up security on your network;
otherwise, anyone in the radio coverage area can access your network.
Click Wireless > Security. The following screen displays.
SSID Setting This displays Primary SSID.
NOTE: You may have additional BSSIDs, depending on
your contract with your service provider.
SSID Name Enter the name that you want to use for your wireless
network. This is the name that identifies your network,
and to which wireless clients connect.
NOTE: It is suggested that you change the SSID from its
default, for security reasons.
Hidden Use this field to make your network visible or invisible to
other wireless devices.
Select the checkbox if you do not want the CVE-
30360 to broadcast the network name (SSID) to all
wireless devices in the coverage area. Anyone who
wants to connect to the network must know the
SSID.
Deselect the checkbox if you want your network
name (SSID) to be public. Anyone with a wireless
device in the coverage area can discover the SSID,
and attempt to connect to the network.
In Service This field controls whether or not the SSID is in
operation.
NOTE: At the time of writing, this field is not user-
configurable.
WMM Mode Select the checkbox if you want to apply Wifi MultiMedia
(WMM) Quality of Service (QoS) settings to this SSID.
TABLE 25: The Wireless > Basic Screen (continued)
To Next Page
Loading...
Need help?
General
