HITRON CVE-30360 USER’S GUIDE
FIREWALL
4.4 THE IP FILTERING SCREEN
Use this screen to configure IP filtering. You can turn IP filtering on or off and
configure new and existing IP filtering rules.
Click Firewall > IP Filtering. The following screen displays.
FIGURE 16: The Firewall > IP Filtering Screen
The following table describes the labels in this screen.
Add Click this to add the device to the list you specified.
Cancel Click this to clear the Manually-Added LAN Devices
fields.
Apply Click this to save your changes to the fields in this screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this screen.
TABLE 16: The Firewall > IP Filtering Screen
All IP Filtering Rules Use this to turn IP filtering on or off.
Deselect the checkbox to enable IP filtering.
Select the checkbox to disable IP filtering (default).
NOTE: You can add, edit or delete IP filtering rules only
when this checkbox is deselected.
Select Select an IP filtering rule’s radio button ( ) before
clicking Edit or Delete.
# This displays the arbitrary identification number
assigned to the IP filtering rule.
Application Name This displays the arbitrary name you assigned to the
rule when you create it.
TABLE 15: The Firewall > MAC Filtering Screen (continued)
To Next Page
Loading...
Need help?
General
