Hive Active Heating - Hot water; How to turn your hot water on or off

2a – Installing the receiver
You should fit the receiver in a convenient location close to the boiler or
central heatin system. Make sure it’s at least cm away from lare metal
objects, such as a boiler or hot water cylinder, to avoid interference with radio
sinals. Take care to avoid any cables and pipes that may be buried in the
walls. Once you’ve found a suitable location, install the receiver as follows:
Loosen the screws on the underside
of the receiver and remove the
backplate by pullin the bottom
of it away from the front panel.
1
10
Status
Hot
water
Central
heating