Hive Active Heating Installation Guide

21
Light Colour Pattern Meaning Notes
Central
heatin
GREEN Solid Heating is on.
Central
heatin
GREEN Flashin Commands queued.
The receiver has received
2 or more commands to
switch the boiler on or off
within 1 minute. Or, Heating
Boost mode with taret
temperature lower than
room temperature.
The Hive receiver protects
the boiler from damae that
may occur if it’s switched on
and off very quickly. Once
the boiler has been switched
on (or off), it will not chane
state aain for 1 minute as a
protective measure.
Hot water
GREEN Solid Hot water is on. This liht is only present on
dual channel receivers.
Hot water
GREEN Flashin Commands queued.
The receiver has received
2 or more commands to
switch the boiler on or off
within 1 minute.
See ‘Central heatin’.
Receiver lights and what they mean:
The receiver has lihts on its front panel to show what it’s doin.
A sinle channel receiver has two lihts – Status and Central heatin.
A dual channel receiver has an additional liht for
Hot water. This is
what the lihts mean:

Hive Active Heating Specifications

General

Interface	ZigBee
Product color	Black, White
Memory function	-
Smart thermostat	Yes
Brand compatibility	Hive
Suitable for boiler types	Electric, Natural gas, Oil
Battery type	AA
Power source	AC/Battery
Number of batteries supported	4
Mobile operating systems supported	Android, iOS