10. Built-in devices
127
Heating with electricity
Use the following procedure to activate the "Heating with electrici-
ty" function. The higher the selected output, the faster the camper
will heat up.
If electricity and gas are selected together, you can set whether gas
or electricity is to take priority (see Tools menu). The boiler uses
no higher output than is required, even if 3 kW has been selected.
1. Starting and changing the dierent heating levels step by step
(O, 1 kW, 2 kW or 3 kW) with "+" or "-". The value set will
be displayed on the screen. When activated, the plus icon is
shown in green.
2. To switch o the electric heating operation, keep pressing the
"-" key until you reach O.
Heating with gas
To activate heating with gas:
If electricity and gas are selected together, you can set whether gas
or electricity is to take priority (see Tools menu).
1.
Start gas operation by pressing on the liquid gas ame. The
icon for liquid gas is activated and turns green.
2. To switch o gas operation, press the liquid gas ame. The icon
is now blue.
To Next Page
Loading...