Hobby Excellent - 6.6 External storage locker

6. Interior structure
53
Hanging table
To lower
•  Raisethefrontendofthetabletopbyapprox.30°.
• Pulldownthelowerpartofthetableleg
j
,folditoverby90°
andlayitalongside.
• Foldoutthesupportinglegs
k
by90°.
• Pullthetabletopoutoftheupperwallbrackets
l
.
• Raisethefrontendofthetabletopconsiderablyandhookit
diagonallyfromaboveintothelowerwallbrackets
m
.
• Placethesupportinglegsatthefrontedgeofthetabletopon
theoor.
3
2
1
4
Hanging table
Supporting legs
Lowered hanging table
6.4 Seating arrangements and sleeping areas
Preparing to convert the bed
• Lowerthetable(see Chapter 6.3 Tables).
• Ifnecessary,foldoutthebedexpansionintheseatingarrange-
ment(model-specic).
Theseatgroupscanbeconvertedintocomfortablebeds.
Converting the seating arrangement to a bed
Converting the Round Seating Arrangement
Notes on arranging the cushions:
- Howtoarrangethecushionsdependsonthetrailermodel.
- Insometrailermodels,oneormoreadditionalcushions
m
are
requiredtoconvertthebed.Theseareincludedseparatelyin
thetrailer.
- Inroundseatingarrangements,therearseatcushions
j
remain
inplace.
- Dependingonthemodel,itmaybenecessarytoshifttheside
back
k
 and seat cushions
l
 . To do this, push the seat
cushions
l
towardsthemiddleandplacethebackcushions
k
horizontallyalongthesides.Anyopenspacethatcanstillbe
seen/feltshouldbelledwithoneormoreadditionalcushions.
.
1
1
1
2
2
34
3