5. Exterior structure
38
Unlocking the upper part of the door
• Turn the lever
l
90° to the left and place it in a horizontal posi-
tion to separate the upper and lower parts of the door.
• Open the upper part of the door completely and press it against
the wall of the trailer. The lock on the door will snap into its
counterpart (see Holding the entrance door in place).
• The lower part of the door can now be swung back separately
from the upper part into the door frame and, using the lever
l
,
locked into place.
Holding the entrance door in place
The door retainer prevents the entrance door from falling shut. To
hold the door or just the upper part in place (if the door has been
partitioned) press it against the wall of the trailer so that the lock
j
snaps into its counterpart
k
.
Door retainer
2
1
3
3
Locking the lower part of the door
Mechanism for partitioned entrance door
Locking the upper part of the door
• Turn the lever
l
90° to the right and back into an upright posi-
tion to connect the upper and lower parts of the door.
• To close the whole door, use the handle to press it into the
frame.
Never close the upper part of the door if the insect
screen is closed. The insect screen must always be
open when you lock the door.
To Next Page
Loading...