HOLDEN MY19 RG Colorado - Apple Carplay and Android Auto

Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
136
Manage Predefined Messages :
Touch to add, change, or delete
predefined messages.
Apple CarPlay and
Android Auto
If equipped, Android Auto™ and/or
Apple CarPlay™ capability may be
available through a compatible
smartphone. If available, a
PROJECTION icon will appear on
the Home Page of the infotainment
display.
To use Android Auto and/or Apple
CarPlay:
1. Download the Android Auto
app to your phone from the
Google™ Play store. There is
no app required for Apple
CarPlay.
2. Connect your Android phone or
Apple iPhone by using the
compatible phone USB cable
and plugging into a USB data
port. For best performance, use
the device's factory-provided
USB cable. Aftermarket or
third-party cables may
not work.
The PROJECTION icon on the
Home Page will change to Android
Auto or Apple CarPlay depending
on the phone. Android Auto and/or
Apple CarPlay may automatically
launch upon USB connection. If not,
press the Android Auto and/or Apple
Carplay icon on the Home Page to
launch.
For further information about
Android Auto and Apple CarPlay in
the vehicle, seek the assistance of
your dealer.
Android Auto is provided by Google
and is subject to Google’s terms
and privacy policy. CarPlay is
provided by Apple and is subject to
Apple’s terms and privacy policy.
For Android Auto support see
https://support.google.com/
androidauto or Apple CarPlay
support at https://www.apple.com/br/
ios/carplay/. Apple or Google may
change or suspend availability at
any time.
If Android Auto device is connected
while another device was paired,
the switch devices pop up message
will appear as follows:
“Connecting Android Auto, will
disconnect Bluetooth
Device (Name)."
Note
For using Android Auto function, the
date of Infotainment System should
be the same as the Android Auto
device.
Note
For your safety, some applications
are disabled while your vehicle is in
motion.
Note
To end Android Auto, disconnect the
phone from the USB port or change
the USB setting on the phone.
In some cases, it might be
necessary to unpair the phone from
the radio before plugging the USB
cable to start the Android Auto.
Infotainment System - MyLink with Built-in Navigation