30.2.2 Learn Speed
This parameter adjusts how fast the learning process occurs. In the beginning with a new tune it should be set to “Fast”. After the vehicle
is driven under various operating conditions, and is running well, it is advised to disable learning, OR slow the Learn Speed to “Slow”.
Figure 68 Figure 69
Figure 70
30.3 Basic Idle
Selecting BASIC IDLE allows you to change the Target Hot Engine Idle Speed. This should be adjusted to your desired idle RPM. Values
between 650-800 rpm are typical. Larger camshafts or aftermarket torque converters may require a slightly higher value to maintain
proper idle quality while in gear.
Figure 71 Figure 72
Selecting IDLE allows you to change the Target Idle Speed.
IDLE SPEED: Adjust the idle speed to what is desired.
To Next Page
Loading...
