When the "I(." icon appears on the LCD screen in the state of slow flashing
and the indicator lights turn yellow alternately, it indicates that the drone
can start compass calibration.
1
■
••
\
Step 2: Hold the drone horizontally and rotate the drone in 3 complete
circles. When completed the green lights will flash.
MO MO
Weak GPS signal
0 0 %.%
■
,,
in
a/ OD
Good GPS signal
Step 3: Hold the drone vertically and rotate the drone in 3 complete circles.
When completed the front red lights and rear yellow lights will turn solid
and " 4
-
* " on the LCD screen changes from slow flash to disappear.
Attention:
To ensure a stable flight, we recommend that pilots perform a
compass calibration before each flight.
-21-
To Next Page
Loading...
