www.holzmann-maschinen.at
The workplace must have:
sufcient lighting conditions to prevent
shadows or eye strain.
a clean, level underground that is vibrati-
on resistent! We strongly recommend to
install the the metal lathe onto a solid,
vibration-resistent workbench.
enough place around the machine for safe
handling and feeding of the material.
A proper, compatible electric supply cir-
cuit.
Humidity: max. 90% for max. 25°C
max. 70% for max. 40°C
height above sea level: max. 1000m
Do not use the machine outdoors.
Do not use the machine in workplaces
with explosion and re hazard.
The work with a metal lathe always con-
tains a certain risk that can never be eli-
minated entirely. This is a non comple-
te shortlist indicating some of the most
dangerous remaining residual risks:
Risk of personal injury due to coming into
contact with the rotating workpiece or
rotating chuck.
Risk of personal injury through chips -
wear safety goggles.
Risk of electrocution when touching lea-
ding machine components.
Risk of personal injury by touching sharp
workpiece edges.
You can minimize these residual risks by
following all security, maintenance and
operation rules.
WORKPLACE REQUIREMENTS INAPPROPRIATE MACHINE USAGE
RESIDUAL RISKS
Any use that does not comply with the
security rules, maintenance guidelines or
operation rules described in this manual.
Any use that does not comply to max.
workpiece dimensions, max. turning
speed or other technical limitations.
The use of the machine by not sufcient-
ly trained persons in general.
HOLZMANN Maschinen cannot be made
liable for any damages to machine and
person being a direct or indirect conse-
quence of inproper use of the machine.
ENGLISH
To Next Page
Loading...
