SAFETY GUI DELI NES
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Seit e 2 9
METALLDREHMASCHINE / METAL TURNING LATHE ED 750FD
N ever leave the m achine running unattended! Before leaving the w orking area
sw itch the m achine off and w ait until the m achine stops.
Alw ays disconnect the m achine prior to any act ions perform ed at the m achine.
Avoid unintentional starting
Do not use the m achine w ith dam aged sw itch
The plug of an electrical tool m ust strictly correspond to the socket. Do not use
any adapters together w ith earthed elect ric tools
Each tim e you w ork w ith an elect rically operated m achine, caution is advised!
There is a risk of electric shock, fire, cut t ing injury;
Protect the m achine from dam pness ( causing a short circuit )
Use pow er tools and m a chines never in the vicinity of flam m able liquids and gas-
es ( danger of explosion)
Check the cable regularly for dam age
W hen w orking w ith the m achine out doors, use extension cables suitable for out-
oor use
Do not use the cable to carry t he m achine or to fix the w ork piece
Protect the cable from heat, oil and sharp edges
Avoid body cont act w ith earthed
Before start ing the m achine rem ove any adjusting w renches and screw drivers
Use a clip or clam ping j aw s to secure the w orkpiece
Do not fix the w orkpice w ith your hands
Rotating parts can cause severe cut injuries
Keep the drills sharp and clean, so they get stuck less oft en and are easier to
guide
Keep any m achine that is not being used out of reach of children
NOTI CE
Em ergency procedure
A first aid kit in accordance with DIN 13164 should always be readily available
for a possible accident. Initiate the violation in accordance with the necessary
first aid measures. When requesting support, provide the following details:
1. Place of accident
2. Type of accident
3. Number of injured people
4. Injury type(s)
To Next Page
Loading...
