MAI N TENANCE AND CARE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Seit e 4 0
METALLDREHMASCHINE / METAL TURNING LATHE ED 750FD
1 5 MAI NTENANCE AND CARE
ATTENTI ON
Don’t clean or do m aintenance on the m achine w hile it is st ill connect ed to the pow -
er supply:
Dam ages to m achine and inj uries m ight occur due to unintended sw itching on of the
m achine!
Therefore: Sw itch the m achine off and disconnect it from the pow er supply before
any m aintenance w orks or cleaning is carried out
On t he device are only few of them serviceable com ponents. I t is not necessary t o dis-
m antle the m achine. Repairs m ust only be perform ed by an expert!
Accessories: Use only recom m ended accessories HOLZMANN !
I f you have any quest ions or problem s, contact our custom er service.
1 5 .1 Maintenance
All parts should be lubricated twice weekly.
1 5 .1 .1 Lubrication
By smearing:
reduces the wear and friction resistance
enhancing the life
protects metallic surfaces from corrosion
We recommend:
for the purpose grease lubrication of the class 2NLGI
All 8 hours of operation is to grease the lathe. The lubrication points bed management, dovetail-
cross slide dovetail-longitudinal slide and tailstock are using an oil can and a commercially availa-
ble lubricating oil under back and forth because of the carriage or the quill, greased.
All other lubrication points at the designated grease nipples using a grease gun
lubricated.
This should be controlled and repeated at regular intervals.
The gear once a month with the right engine oil or fat.
This should be controlled and repeated at regular intervals.
1 5 .2 Cleaning
NOTE
The use of solvent s, harsh chem icals or abrasive cleaners leads to dam age to the m achine!
Therfore: When cleaning water and mild detergent if necessary use.
Bare surfaces of the machine against corrosion impregnate ( with anti-rust WD40 )
1 5 .3 Disposal
Do not dispose of the ED 750FD in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local
dealer for a replacement unit, the latter is obliged to exchange your old
To Next Page
Loading...
