Honda Electronics HE-51C - Installation of Water Temp. Sensor (Option); Putting the Sun Shield






4-3. Installation of water temp. sensor (option)







※Water temp. sensor is option.
●Work on the board is too unstable and risky.
Installation or maintenance of water temp. sensor should be done after you land and fix
the boat.
●When you work using electric tools, please keep your hands dry.
It causes to electric shock.
【Installation of transom water temp.
sensor (TC02ES)】
【Installation of water temp. sensor】
Fix water temp. sensor unit (TC01C, TC01G)
with 2 screws at the place where body of boat is
always in water.
Fix TC02ES with 4 screws.











Water temp.
sensor
Install with screws


















4-4. Putting the sun shield
[Method to remove]
Slip sun shield toward arrow while
you raise the pick on it’s top.
Groove
Pick
Pick
[Method to put]
Fit picks on top and bottom of sun
shield to groove of display unit and
hook. Then, hook and put it.
11