. Alarm
1
Alarm goes off within or out of two set values (TEMP SET 1, TEMP SET 2).
ALARM SET ： OFF , IN RANGE, OUT RANGE
TEMP SET1 : 0~40°C
TEMP SET 2 : 0~40°C
Press
key. “MENU 1” is shown.
Press
key for more than 2 seconds. “MENU 2” is shown. Select “TEM
ALARM” with of cross key.
Press
key. [TEMP ALARM SETTING] is shown.
Select “OFF”, “IN RANGE” or “OUT RANGE” with
key.
OFF: Water temp. alarm is canceled.
IN RANGE: Alarm goes off when water temp. comes between TEMP SET 1 and TEMP SET 2.
O
UT RANGE: Alarm goes off when water temp. goes out of TEMP SET 1 and TEMP SET 2.
Select “TEMP SET 1” or “TEMP SET 2” with
of cross key.
Set Water Temp. with
key.
5
4
2
3
Alarm goes off within or out of two set values (DEPTH SET 1, DEPTH SET 2).
ALARM SET : OFF , IN RANGE, OUT RANGE
DEPTH SET 1 : 1m~300m
DEPTH SET 2 : 1m~300m
Example
5
2
3
4
Example
1
Press
key. “MENU 1” is shown.
Press
key for more than 2 seconds.
“MENU 2” is shown. Select “DEPTH ALARM”
with of cross key.
Press
key. [DEPTH ALARM SETTING]
s shown.
i
Select “OFF”, “IN RANGE” or “OUT RANGE”
with
key.
OFF: Water temp. alarm is canceled.
IN RANGE: Alarm goes off when depth. comes
between DEPTH SET 1 and DEPTH SET 2.
OUT RANGE: Alarm goes off when depth goes out o
To Next Page
Loading...