Honda 2004 CRF250X - Air Cleaner Housing Installation

Remove the bolts, collars and air cleaner housing.
Remove the screws and
mud guard.
Check the carburetor connecting boot is sealed
properly at the air cleaner housing .
Check the air cleaner housing for damage.
Remove the
carburetor connecting boot from the air
cleaner housing and seal thoroughly if any sign of
inadequate sealing is detected.
Apply sealmg agent Install the removed parts in the reverse order of
all the way around removal.
the connecting
surface
of the air
cleaner housing
INSTALLATION
CONNECTING BOOT
FUEL SYSTEM
MUD GUARD
~
AIR CLEANER HOUSING
MUD GUI'HO
AIR CLEANER ELEMENT
CDINN"CTII NG BOOT BAND
ELEMENT HOLDER
AIR CLEANER HOUSING
LEFT SIDE COVER
: Apply Honda Bond A or Honda Handgrip Cement or equivalent
5-9